theyre ass

README.md

@@ -0,0 +1,160 @@
+# NixOS configuration with Hyprland
+
+
+This repository contains the declarative configuration files for my Thinkpad T480, it uses NixOS and Hyprland as the window compositor, it should work on most hardware just fine, assuming you are using an Intel IGPU, adjust accordingly to the NixOS wiki if needed.
+
+> It works on my hardware, and of course it is not guaranteed to fully work on yours, although it should.
+
+
+
+![screenshot](/assets/preview.jpg)
+
+
+
+---
+
+
+## Preparation
+
+
+In order to use these configuration files you do need to use NixOS unstable, ideally download the unstable ISO instead of the stable one, and install the system that way to avoid unnecessary steps, you can download it from [here](https://releases.nixos.org/nixos/unstable/nixos-26.05pre980183.4bd9165a9165) and burn it onto your USB drive accordingly to their wiki page, after that you can boot from the USB. It works on stable tho as long as you comment the dunst section in ```desktop/home/default.nix```.
+
+
+## Installation
+
+
+This setup assumes that you are going to use full disk encryption and label the boot partition as "BOOT", and the root partition as "ROOT", here is a list of steps in order to do so:
+
+
+Check your drive identificator and create a 512MB boot partition, and a root partition of any size, can be the rest of your disk.
+
+
+
+```bash
+sudo lsblk
+fdisk /dev/sdX
+```
+
+
+After partitioning the drive and assuming /dev/sdX1 is the boot partition and /dev/sdX2 is the root one, do the following to achieve full disk encryption and format the drives with correct labels:
+
+
+```bash
+sudo mkfs.fat -F 32 /dev/sdX1
+sudo fatlabel /dev/sdX1 BOOT
+sudo cryptsetup luksFormat -y --label="ROOT" /dev/sdX2
+sudo cryptsetup luksOpen /dev/sdX2 ROOT
+sudo mkfs.xfs -L "ROOT" /dev/mapper/ROOT
+```
+
+
+Afterwards you can mount the drives:
+
+
+```bash
+sudo mount /dev/disk/by-label/ROOT /mnt
+sudo mkdir -p /mnt/boot
+sudo mount /dev/disk/by-label/BOOT /mnt/boot
+```
+
+
+After mounting the drives, generate default directories for NixOS, cleanse of the old unnecessary files, enter a Nix shell in order to use the git package, and clone this repo:
+
+
+```bash
+sudo nixos-generate-config --root /mnt
+sudo rm -rf /mnt/etc/nixos/*
+sudo nix-shell -p git
+cd /mnt/etc/nixos/
+git clone https://git.cln.cat/cln6/nixos-thinkpad
+```
+
+
+After that you can leave the Nix shell and enter into the proper directory, and install the system:
+
+
+```bash
+exit
+cd /mnt
+sudo nixos-install --flake /mnt/etc/nixos#cln (replace cln with your new hostname if you have decided to change it, instructions on how to do that are in the Notes section of this repo)
+```
+
+
+That's it, after it's done installing you should be able to reboot into the system, the default username is "cln" and password is "123", please change it after installation with the ```passwd cln``` command.
+
+
+
+# Keybinds
+
+
+---
+
+
+## Applications
+
+  | Keybind | App |
+  |---|---|
+  | Super + D | App launcher |
+  | Super + Enter | kitty |
+  | Super + Q | kitty |
+  | Super + Shift + D | Mullvad browser |
+  | Super + Shift + F | Librewolf |
+  | Super + E | File manager |
+  | Super + H | Clipboard history |
+  | Super + B | Overskride ( Bluetooth ) |
+  | Super + P | Pwvucontrol ( Audio ) |
+  | Super + Shift + P | Power menu |
+
+
+---
+
+
+## Window Management
+
+
+  | Keybind | Action |
+  |---|---|
+  | Super + Shift + Q | Kill active window |
+  | Super + V | Toggle floating mode |
+  | Super + J | Toggle split |
+  | Super + O | Toggle dwindle |
+
+
+---
+
+
+## Workspace related
+
+
+  | Keybind | Action |
+  |---|---|
+  | Super + 1-10 | Switch workspace to your chosen number |
+  | Super + Shift + 1-10 | Move the active window to your chosen workspace |
+  | Super + S | Switch to special workspace |
+  | Super + Shift + S | Move the active window to the special workspace |
+
+
+---
+
+
+## Other
+
+
+  | Keybind | Action |
+  |---|---|
+  | Super + Arrow key | Switch your current focused window |
+  | Super + M | Exit hyprland |
+  | Super + F1 | Toggle game mode |
+
+
+---
+
+
+
+# Notes
+- In order to use a different username, replace every "cln" word with your desired username in these files: ```configuration.nix```, ```home.nix``` as well as "users.cln" line in ```flake.nix```.
+- In order to change your hostname, edit the hostname line in ```networks/default.nix```, as well as all other lines with the word "cln" except for the "users.cln" line.
+
+
+# Summary
+So yeah these are my configuration files, I am aware that they are nowhere near perfect, I am a really unprofessional and new NixOS user as for now, but it is what it is for now, my next distro will probably be Gentoo if everything goes right, therefore this will stay as it is for now I think.

configuration.nix

@@ -0,0 +1,157 @@
+# Edit this configuration file to define what should be installed on
+# your system. Help is available in the configuration.nix(5) man page, on
+# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
+
+{ config, lib, pkgs, ... }:
+
+{
+  imports =
+    [ # Include the results of the hardware scan.
+      ./hardware-configuration.nix
+      ./networks
+      ./desktop
+      ./virtualisation
+    ];
+
+  # Use the GNU GRUB bootloader.
+  boot.loader = {
+    grub = {
+      enable = true;
+      device = "nodev";
+      efiSupport = true;
+    };
+    efi.canTouchEfiVariables = true;
+  };
+
+  # Catppuccin for GRUB
+  catppuccin.grub = {
+    enable = true;
+    flavor = "mocha";
+  };
+
+  # Catppuccin for tty
+  catppuccin.tty = {
+    enable = true;
+    flavor = "mocha";
+  };
+
+  # Use latest kernel.
+  boot.kernelPackages = pkgs.linuxPackages_latest;
+
+  # Enable NixOS flakes
+  nix.settings.experimental-features = [ "nix-command" "flakes" ];
+
+  # Set your time zone.
+  time.timeZone = "Europe/Warsaw";
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  users.users.cln = {
+    isNormalUser = true;
+    description = "cln";
+    password = "123"; # Change
+    extraGroups = [ "wheel" "video" "render" "input" "libvirtd" ]; 
+    shell = pkgs.zsh;
+    home = "/home/cln";
+  };
+
+  # Shell for user
+  programs.zsh.enable = true;
+  programs.bash.enable = true; # In case something breaks
+
+  swapDevices = [{ # Create a swap file
+  device = "/.swapfile";
+  size = 8*1024;
+  }];
+
+  # Intel GPU Drivers
+  hardware.graphics = {
+    enable = true;
+    extraPackages = with pkgs; [
+      # Required for modern Intel GPUs (Xe iGPU and ARC)
+      intel-media-driver     # VA-API (iHD) userspace
+      vpl-gpu-rt             # oneVPL (QSV) runtime
+
+      # Optional (compute / tooling):
+      intel-compute-runtime  # OpenCL (NEO) + Level Zero for Arc/Xe
+      # NOTE: 'intel-ocl' also exists as a legacy package; not recommended for Arc/Xe.
+      # libvdpau-va-gl       # Only if you must run VDPAU-only apps
+    ];
+  };
+
+  environment.sessionVariables = {
+    LIBVA_DRIVER_NAME = "iHD";     # Prefer the modern iHD backend
+    # VDPAU_DRIVER = "va_gl";      # Only if using libvdpau-va-gl
+  };
+
+  # May help if FFmpeg/VAAPI/QSV init fails (esp. on Arc with i915):
+  hardware.enableRedistributableFirmware = true;
+  boot.kernelParams = [ "i915.enable_guc=3" ];
+
+  # X related settings
+  services.xserver = {
+    enable = false;
+    xkb.layout = "pl";
+    videoDrivers = [ "modesetting" ];
+  };
+
+  # Enable pipewire 
+  security.rtkit.enable = true;
+  services.pipewire.wireplumber.enable = true;
+  services.pipewire = {
+    enable = true; # if not already enabled
+    alsa.enable = true;
+    alsa.support32Bit = true;
+    pulse.enable = true;
+    jack.enable = true;
+  };
+
+  # Bluetooth support
+  hardware.bluetooth = {
+    enable = true;
+    powerOnBoot = true;
+    settings = {
+      General = {
+        # Shows battery charge of connected devices on supported
+        # Bluetooth adapters. Defaults to 'false'.
+        Experimental = true;
+        # When enabled other devices can connect faster to us, however
+        # the tradeoff is increased power consumption. Defaults to
+        # 'false'.
+        FastConnectable = true;
+      };
+      Policy = {
+        # Enable all controllers when they are found. This includes
+        # adapters present on start as well as adapters that are plugged
+        # in later on. Defaults to 'true'.
+        AutoEnable = true;
+      };
+    };
+  };
+
+  # List packages installed in system profile.
+  # You can use https://search.nixos.org/ to find more packages (and options).
+  environment.systemPackages = with pkgs; [ 
+  cryptsetup
+  xfsprogs
+  vim
+  ];
+
+  # This option defines the first version of NixOS you have installed on this particular machine,
+  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
+  #
+  # Most users should NEVER change this value after the initial install, for any reason,
+  # even if you've upgraded your system to a new NixOS release.
+  #
+  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
+  # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
+  # to actually do that.
+  #
+  # This value being lower than the current NixOS release does NOT mean your system is
+  # out of date, out of support, or vulnerable.
+  #
+  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
+  # and migrated your data accordingly.
+  #
+  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
+  system.stateVersion = "26.05"; # Did you read the comment?
+}

desktop/default.nix

@@ -0,0 +1,62 @@
+{ config, lib, pkgs, ... }:
+
+{
+  imports = [
+    ./ly
+  ];
+
+  services.dbus.enable = true;
+
+  # Enable hyprland globally
+  programs.hyprland.enable = true;
+
+  xdg.portal = {
+    enable = true;
+    extraPortals = with pkgs; [
+      xdg-desktop-portal-hyprland
+    ];
+    wlr.enable = true;
+  };
+
+  # Auto mounting of USBs
+  services.udisks2.enable = true;
+
+  # Polkit
+  security.polkit.enable = true;
+
+  # Steam
+  programs.steam = {
+    enable = true;
+    remotePlay.openFirewall = false;
+    dedicatedServer.openFirewall = false;
+    localNetworkGameTransfers.openFirewall = false;
+  };
+
+  # Allow unfree
+  nixpkgs.config.allowUnfreePredicate = pkg: builtins.elem (lib.getName pkg) [
+    "steam"
+    "steam-original"
+    "steam-unwrapped"
+    "steam-run"
+  ];
+  
+  # Mullvad
+  services.mullvad-vpn.enable = true;
+
+  environment.systemPackages = with pkgs; [
+    nmap
+    unzip
+    tor-browser
+    git
+  ];
+
+  # Fonts for everything pretty much
+  fonts.packages = with pkgs; [
+    noto-fonts
+    font-awesome
+    font-awesome_4
+    nerd-fonts.jetbrains-mono
+    adwaita-fonts
+  ];
+
+}

desktop/home/btop/default.nix

@@ -0,0 +1,17 @@
+{ config, lib, ... }:
+
+{
+  programs.btop = {
+    enable = true;
+    settings = {
+      #TODO: Make a proper config
+    };
+  };
+
+  # Catppuccin
+  catppuccin.btop = {
+    enable = true;
+    flavor = "mocha";
+  };
+
+}

desktop/home/cava/default.nix

@@ -0,0 +1,18 @@
+{ config, lib, ... }:
+
+{
+  programs.cava = {
+    enable = true;
+    settings = {
+      # im genuinely so lazy rn
+    };
+  };
+
+  # Catppuccin
+  catppuccin.cava = {
+    enable = true;
+    flavor = "mocha";
+    transparent = true;
+  };
+
+}

desktop/home/clipboard/default.nix

@@ -0,0 +1,10 @@
+{ config, libs, pkgs, ... }:
+
+{
+
+  home.packages = with pkgs; [
+    wl-clipboard
+    cliphist
+  ];
+
+}

desktop/home/default.nix

@@ -0,0 +1,36 @@
+{ config, pkgs, ... }:
+
+{
+  imports = [
+    ./hyprland
+    ./hyprpaper
+    ./hypridle
+    ./hyprlock
+    ./hyprsunset
+    ./waybar
+    ./kitty
+    ./zsh
+    ./dunst
+    ./rofi
+    ./clipboard
+    ./lf
+    ./librewolf
+    ./fzf
+    ./fastfetch
+    ./btop
+    ./cava
+    ./neovim
+    ./mullvad
+  ];
+
+  home.packages = with pkgs; [
+    nautilus
+    tty-clock
+    mullvad-browser
+  ];
+
+  xdg.userDirs = {
+    enable = true;
+    createDirectories = true;
+  };
+}

desktop/home/dunst/default.nix

@@ -0,0 +1,54 @@
+{ config, lib, pkgs, ... }:
+
+{
+  services.dunst = {
+    enable = true;
+    settings = { #TODO: Write my own config, this one is temporary from GGORG0 on Github
+        global = {
+          width = 450;
+          shrink = "no";
+
+          follow = "mouse";
+
+          progress_bar = true;
+          progress_bar_max_width = 430;
+
+          transparency = 25;
+
+          frame_color = "#89B4FA";
+
+          idle_threshold = 120;
+
+          font = "JetBrainsMono Nerd Font Mono 12";
+          format = "<small>%a</small>\\n<b>%s</b>\\n%b";
+
+          alignment = "right";
+
+          word_wrap = "yes";
+          ellipsize = "end";
+
+          icon_position = "right";
+          min_icon_size = 0;
+          max_icon_size = 64;
+
+          history_length = 50;
+
+          browser = "${lib.getExe pkgs.librewolf} -new-tab"; # TODO: get the browser from an option
+          dmenu = "${lib.getExe config.programs.rofi.package} -dmenu -p dunst:";
+
+          corner_radius = 20;
+
+          mouse_left_click = "do_action, close_current";
+          mouse_middle_click = "close_all";
+          mouse_right_click = "close_current";
+        };
+    };
+  };
+
+  # Catppuccin!
+  catppuccin.dunst = {
+    enable = true;
+    flavor = "mocha";
+  };
+
+}

desktop/home/fastfetch/default.nix

@@ -0,0 +1,10 @@
+{ config, lib, ...}:
+
+{
+  programs.fastfetch = {
+    enable = true;
+    settings = {
+      # TODO: Make my config
+    };
+  };
+}

desktop/home/fzf/default.nix

@@ -0,0 +1,17 @@
+{ config, lib, ...}:
+
+{
+
+  programs.fzf = {
+    enable = true;
+    enableZshIntegration = true;
+  };
+
+  # Catppuccin
+  catppuccin.fzf = {
+    enable = true;
+    flavor = "mocha";
+    accent = "lavender";
+  };
+
+}

desktop/home/hypridle/default.nix

@@ -0,0 +1,39 @@
+{ config, lib, ... }:
+
+{
+  services.hypridle = {
+    enable = true;
+    settings = {
+      general = {
+        lock_cmd = "pidof hyprlock || hyprlock";
+        before_sleep_cmd = "loginctl lock-session";
+        after_sleep_cmd = "hyprctl dispatch dpms on";
+      };
+      listener = [
+        {
+          timeout = 150;
+          on-timeout = "brightnessctl -s set 10";
+          on-resume = "brightnessctl -r";
+        }
+        {
+          timeout = 150;
+          on-timeout = "brightnessctl -sd rgb:kbd_backlight set 0";
+          on-resume = "brightnessctl -rd rgb:kbd_backlight set 1";
+        }
+        {
+          timeout = 300;
+          on-timeout = "loginctl lock-session";
+        }
+        {
+          timeout = 300;
+          on-timeout = "hyprctl dispatch dpms off";
+          on-resume = "hyprctl dispatch dpms on && brightnessctl -r";
+        }
+        {
+          timeout = 600;
+          on-timeout = "systemctl suspend";
+        }
+      ];
+    };
+  };
+}

desktop/home/hyprland/Catppuccin-B-LB-Dark-Macchiato-hdpi/xfwm4/themerc

@@ -0,0 +1,23 @@
+button_offset=9
+button_spacing=0
+
+show_app_icon=false
+
+full_width_title=true
+
+title_shadow_active=false
+title_shadow_inactive=false
+
+title_horizontal_offset=3
+
+active_text_color=#f0f7fe
+active_text_shadow_color=#222426
+
+inactive_text_color=#999da3
+inactive_text_shadow_color=#222426
+
+shadow_delta_height=2
+shadow_delta_width=0
+shadow_delta_x=0
+shadow_delta_y=-5
+shadow_opacity=40